
Chimney Work in Rolling Hills Estates, Chosen by the Sign
Which Sign Are You Seeing?
A damper that drags, a dark smoke shelf, smoke on lighting, a smell in summer. Tell us which and we call back with the service that fits.
Chimney Sweep
Creosote depth checked at the smoke shelf and in the flue, then cleared with the tool that stage of buildup needs.
Learn MoreChimney Inspection
Damper, smoke shelf, liner and crown read in order, so each sign is traced to the part behind it.
Learn MoreChimney Repair
Water marks and loose mortar followed back to the crown, cap or joint where they start, and fixed there.
Learn MoreFireplace Inspection
A damper that drags or a crack in the firebox panel gets looked at, measured and photographed on the spot.
Learn MoreFireplace Repair
Damper, refractory and smoke shelf repairs, limited to the part the inspection pointed to.
Learn MoreChimney Level 2 Inspection
A camera run of the whole flue for a sale or after a quake, with stills of the joints and the creosote.
Learn MoreChimney Cap Installation
A cap sized from the flue tile measurement, for when rain marks or nesting debris show up below.
Learn MoreChimney Flashing Repair
A ceiling stain beside the chimney traced to the flashing seam, then resealed or replaced there.
Learn MoreChimney Masonry Repair
Joints probed for depth before repointing, with mortar matched in color to the brick around them.
Learn MoreChimney Rebuilds
Partial or full rebuilds when a lean or through-cracks go beyond what repointing can hold.
Learn MoreFireplace Cleaning
Ash, soot film and cloudy glass cleared, with any glazed creosote at the throat noted for you.
Learn MoreGas Fireplace Cleaning
A lazy yellow flame or soot on the glass traced to the burner, pilot or logs and cleaned there.
Learn MoreGas Fireplace Repair
A pilot that drops out is tested part by part until the one failed part is found.
Learn MoreFireplace Remodel
New surrounds and mantels planned after the firebox and flue are read for wear.
Learn MoreFireplace Inserts
Inserts sized from the firebox opening and flue measurements, with the liner they need.
Learn MorePellet Stove Repair
Auger, igniter, blower and board tested in turn until the fault shows itself.
Learn MoreWood Stove Repair
Smoke at the door or a slow burn traced to the gasket, baffle or firebrick behind it.
Learn MoreGas Logs
Log sets sized from the firebox and room measurements, vented or ventless.
Learn MoreNot Sure Which Service Fits the Sign?
Book a measured sweep. Once we know how much creosote is there, the next step, if any, is easy to name.
Call (562) 263-9578Cedar Valley Chimney Company
Signs, findings and fixes for a sale, a listing or a building
Four pages that start from what can be seen and measured: selling or buying, forwarding facts to a client, answering a board, and tracing a repair back to its cause.
Chimney check before listing
A question for listing week, answered with a flue scan and photos.
Quick facts for agents
Three lines you can forward to a client, and the report behind them.
HOA and manager inspections
A building-wide answer in one visit, with a fee for each fireplace.
Fixes and what triggers them
The fix list first, then what points to each repair.
